Vantec 2-port 10G Network PCIe Card with Intel X550-AT Chip
R2085
The Vantec 2-Port 10G Network PCIe Card is design for servers, multi-network or workstation in mind. This 10G networks card provides two ultra-fast 10GBASE-T interface to connect to two separate networks on the outside and link to the inside via PCIe v3.0 at various speed from 2.5GT/s to 8GT/s. Based on the Intel X550-AT chipset, it is the de facto standard chipset in many data center, rackmount or pedestal servers everywhere. This widely integrated chipset in blade and motherboard makes it a must have with any server or workstation OS. This card comes with lots of additional features to further enhanced to functionality of any server and increase your productivity.
In stock
Description
FEATURES
Two ports at 10Gigabit speed
10 GbE/1 GbE/100 Mb/s copper PHYs integrated on-chip
Support jumbo frames of up to 9K
Comes with Low Profile Bracket
802.3az Energy Efficient Ethernet (EEE) support
Full-duplex operation at all supported speeds
Flow Control support: Send/receive pause frames and receive Fifo thresholds
802.1q VLAN support
Support for 2.5GBASE-T and 5GBASE-T
TECHNICAL SPECIFICATIONS
Product Code: VANTEC UGT-PC330GNA
Model: UGT-PC300GNA
Device Support: RJ45 – 10GBASET at various speeds – 10G/5G/2.5G/1G/100Mbps
Ports: 2, 10GBASET port
Bus Technology: PCI-Express 3.0 x4
Dimension: 135 x 18 x 120 mm
Weight: 100 g
System Requirements: PCI-Express v3.0 x4, x8 or x16 slots
Microsoft Windows 7, 8.1, 10, Server 2012, 2008 R2
Linux Kernel 2.6.24 or later
VMware ESXi 5.x/6.0
Additional information
| Weight | 0,1 kg |
|---|---|
| Dimensions | 13,5 × 1,8 × 12 cm |
| Condition |
